Product Description
Conveyor Pulley is manufactured as per customer requirement,with main design under national standard,quality inspection focusing on shaft core,welded joint,rubber material and hardness,dynamic balance and so on for longer product life time.
| Drive/Head Pulley – A conveyor pulley used for the purpose of driving a conveyor belt. Typically mounted in external bearings and driven by an external drive source. |
| Return/Tail Pulley – A conveyor pulley used for the purpose of redirecting a conveyor belt back to the drive pulley. Tail pulleys can utilize internal bearings or can be mounted in external bearings and are typically located at the end of the conveyor bed. Tail pulleys commonly serve the purpose of a Take-Up pulley on conveyors of shorter lengths. |
| Snub Pulley – A conveyor pulley used to increase belt wrap around a drive pulley, typically for the purpose of improving traction. |
| Take-Up Pulley – A conveyor pulley used to remove slack and provide tension to a conveyor belt. Take-Up pulleys are more common to conveyors of longer lengths. |
| Bend Pulley – A conveyor pulley used to redirect the belt and provide belt tension where bends occur in the conveyor system. |
The specification of pulley:
Drive Drum: is the main component of power transmission. The drum can be divided into single drum (the angle of the belt to the drum is 210 ° ~ 230 °) , Double Drum (the angle of the belt to the drum is up to 350 °) and
multi-drum (used for high power) .Â
Bend Drum: is used for changing the running direction of the conveyor belt or increasing the surrounding angle of the conveyor belt on the driving roller, and the roller adopts a smooth rubber surface . The drum shaft shall be forgings and shall be nondestructive tested and the inspection report shall be provided.Â
The Various Surface of Pulley:
Conveyor pulley lagging is essential to improve conveyor belt performance, the combination of our pulley lagging can reduces belt slippage, improve tracking and extends life of belt, bearing & other components.
| PLAIN LAGGING:This style of finish is suitable for any pulley in the conveyor system where watershed is not necessary. It provides additional protection against belt wear, therefore, increasing the life of the pulley. |
| DIAMOND GROOVE LAGGING:This is the standard pattern on all Specdrum lagged conveyor pulleys. It is primarily used for reversing conveyor drive pulleys. It is also often used to allow bi-directional pulley rotation, and the pattern allows water to be dispersed away from the belt. |
| HERRINGBONE LAGGING:The herringbone pattern’s grooves are in the direction of rotation, and offers superior tractive properties. Each groove allows water and other liquids to escape between the face of the drum pulley and the belt. Herringbone grooved pulleys are directional and should be applied to the conveyor in a manner in which the grooves point toward the direction of the belt travel. |
| CHEVRON LAGGING:Some customers specify that the points of the groove should meet – as done in Chevron styled lagging. As before with the herringbone style, this would be used on drive drum pulleys and should be fitted in the correct manner, so as to allow proper use of the pattern and water dispersion also. |
| CERAMIC LAGGING:The Ceramic tiles are moulded into the lagging which is then cold bonded to the drum pulley. This style of finish allows excellent traction and reduces slippage, meaning that the belt tension is lower and, therefore as a result, increases the life of the pulley. |
| WELD-ON STRIP LAGGING: Weld-On Strip Lagging can be applied to bi-directional pulleys, and also has a finish to allow the easy dispersion of water or any fluids between the drum pulley and the belt. |
The Components of Pulley:
Â
| 1. Drum or Shell:The drum is the portion of the pulley in direct contact with the belt. The shell is fabricated from either a rolled sheet of steel or from hollow steel tubing. |
| 2.Diaphragm Plates:Â The diaphragm or end plates of a pulley are circular discs which are fabricated from thick steel plate and which are welded into the shell at each end, to strengthen the drum.The end plates are bored in their centre to accommodate the pulley Shaft and the hubs for the pulley locking elements. |
| 3.Shaft :The shaft is designed to accommodate all the applied forces from the belt and / or the drive unit, with minimum deflection. The shaft is located and locked to the hubs of the end discs by means of a locking elements. The shaft and hence pulley shafts are often stepped. |
| 4.Locking Elements:These are high-precision manufactured items which are fitted over the shaft and into the pulley hubs. The locking elements attach the pulley firmly to the shaft via the end plates. |
| 5.Hubs:The hubs are fabricated and machined housings which are welded into the end plates. |
| 6.Lagging:Â It is sometimes necessary or desirable to improve the friction between the conveyor belt and the pulley in order to improve the torque that can be transmitted through a drive pulley. Improved traction over a pulley also assists with the training of the belt. In such cases pulley drum surfaces are `lagged` or covered in a rubberized material. |
| 7.Bearing:Â Bearings used for conveyor pulleys are generally spherical roller bearings, chosen for their radial and axial load supporting characteristics. The bearings are self-aligning relative to their raceways, which means that the bearings can be ‘misaligned’ relative to the shaft and plummer blocks, to a certain degree. In practical terms this implies that the bending of the shaft under loaded conditions as well as minor misalignment of the pulley support structure, can be accommodated by the bearing. |
The Production Process of Pulley:
Our Products:
| 1.Different types of Laggings can meet all kinds of complex engineering requirements. |
| 2.Advanced welding technology ensures the connection strength between Shell and End-Disk. |
| 3.High-strength Locking Elements can satisfy torque and bending requirements. |
| 4.T-shape End-Discs provide highest performance and reliability. |
| 5.The standardized Bearing Assembly makes it more convenient for the end user to replace it. |
| 6.Excellent raw material and advanced processing technology enable the shaft can withstand enough torque. |
| 7.Low maintenance for continued operation and low total cost of ownership. |
| 8.Scientific design process incorporating Finite Element Analysis. |
Our Workshop:
Â
 /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Material: | Carbon Steel |
|---|---|
| Surface Treatment: | Baking Paint |
| Motor Type: | Frequency Control Motor |
| Samples: |
US$ 40/Piece
1 Piece(Min.Order) | Order Sample Free sample
|
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
What safety considerations should be kept in mind when working with V pulleys?
Working with V pulleys involves certain safety considerations to ensure the well-being of individuals and the proper functioning of the equipment. Here are some important safety considerations to keep in mind:
1. Proper Guarding:
Ensure that V pulleys are adequately guarded to prevent accidental contact with moving parts. Guards should be in place to cover the pulleys and belts, minimizing the risk of entanglement, pinch points, or injuries caused by rotating components. Follow industry standards and regulations for guarding requirements and regularly inspect and maintain the guards to ensure their effectiveness.
2. Lockout/Tagout Procedures:
Before performing any maintenance or inspection tasks on equipment with V pulleys, implement proper lockout/tagout procedures. Lockout/tagout involves isolating the power source, de-energizing the equipment, and securing it with locks or tags to prevent accidental startup. This procedure ensures that the equipment remains in a safe and inoperable state during maintenance activities.
3. Personal Protective Equipment (PPE):
Wear appropriate personal protective equipment when working with V pulleys. This may include safety goggles or glasses to protect the eyes from flying debris, gloves to prevent hand injuries, and appropriate clothing to minimize the risk of entanglement. The specific PPE requirements may vary depending on the nature of the task, the environment, and local safety regulations.
4. Training and Education:
Ensure that personnel working with V pulleys receive appropriate training and education on safe operating procedures, maintenance practices, and emergency response protocols. Training should cover topics such as hazard awareness, proper use of equipment, lockout/tagout procedures, and the importance of following safety guidelines. Regular refresher training sessions can help reinforce safe practices and address any new safety concerns.
5. Inspection and Maintenance:
Regularly inspect V pulleys for signs of wear, damage, or misalignment. Pay attention to the condition of the belts, pulley grooves, and tensioning mechanisms. Maintain proper belt tension as per manufacturer recommendations to prevent slippage and ensure efficient power transmission. Promptly address any issues identified during inspections and conduct routine maintenance tasks to keep the pulleys in good working condition.
6. Load and Speed Limits:
Adhere to the load and speed limits specified by the manufacturer for the V pulleys and associated components. Exceeding these limits can lead to belt slippage, decreased efficiency, and potential equipment failure. Ensure that the V pulleys are selected and installed correctly based on the specific application requirements to avoid overloading or operating at excessive speeds.
7. Risk Assessment:
Conduct a comprehensive risk assessment of the work area and equipment to identify potential hazards related to V pulleys. Assess risks associated with installation, operation, maintenance, and emergency situations. Implement appropriate control measures to mitigate the identified risks and regularly review and update the risk assessment as needed.
It is essential to prioritize safety when working with V pulleys. By following these safety considerations and any additional guidelines provided by the equipment manufacturer, the risks associated with V pulley operations can be minimized, ensuring a safe working environment for all personnel involved.
How are V pulleys employed in automotive engines and accessories?
V pulleys play a crucial role in automotive engines and accessories by enabling efficient power transmission and driving various engine components. Here’s a detailed explanation of how V pulleys are employed in automotive engines and accessories:
1. Serpentine Belt System:
Modern automotive engines often utilize a serpentine belt system, which consists of a single, continuous belt that drives multiple engine accessories. The V pulley is a key component in this system, as it provides the necessary driving force for the serpentine belt.
2. Crankshaft Pulley:
The crankshaft pulley is one of the primary V pulleys in an automotive engine. It is connected to the crankshaft, which converts the reciprocating motion of the pistons into rotational motion. The crankshaft pulley drives the serpentine belt, which, in turn, drives various engine accessories.
3. Accessories Driven by V Pulleys:
V pulleys are responsible for driving several important engine accessories, including:
- Alternator: The alternator generates electrical power to charge the battery and power the vehicle’s electrical systems.
- Power Steering Pump: The power steering pump provides hydraulic assistance to make steering easier for the driver.
- Air Conditioning Compressor: The air conditioning compressor pressurizes refrigerant to cool the cabin air.
- Water Pump: The water pump circulates coolant throughout the engine to maintain optimal operating temperature.
- Engine Cooling Fan: In some vehicles, the engine cooling fan is driven by a V pulley to regulate the engine temperature.
4. Speed Control and Belt Routing:
V pulleys allow for speed control and belt routing in automotive engines. By using different-sized pulleys, the speed ratio between the crankshaft pulley and the driven accessories can be adjusted. This ensures that the accessories operate at the desired speed for optimal performance.
Additionally, V pulleys and the serpentine belt system allow for efficient belt routing, maximizing the available space in the engine compartment and optimizing the packaging of engine accessories.
5. Tensioning and Belt Alignment:
Proper tensioning and belt alignment are critical for efficient power transmission and preventing belt slippage or premature wear. V pulleys in automotive engines are often accompanied by tensioners and idler pulleys that help maintain the correct tension in the serpentine belt and ensure proper belt alignment.
6. Durability and Maintenance:
V pulleys used in automotive engines are designed to withstand the demanding conditions of engine operation, including high temperatures, vibrations, and continuous rotation. They are typically made of durable materials such as steel or aluminum.
Regular maintenance, including periodic inspection, tension adjustment, and belt replacement, is necessary to ensure the efficient operation of the V pulley system in automotive engines and accessories.
Overall, V pulleys are essential components in automotive engines and accessories, providing reliable power transmission and driving various engine systems. Their design features, combined with the serpentine belt system, contribute to the efficient operation of automotive engines, ensuring optimal performance and functionality of engine accessories.
In which industries are V pulleys commonly used?
V pulleys, also known as V-belt pulleys or sheaves, are commonly used in various industries due to their versatility and effectiveness in power transmission. Here’s an explanation of the industries where V pulleys are commonly employed:
1. Manufacturing and Industrial Sector:
The manufacturing and industrial sector extensively utilizes V pulleys in a wide range of applications. They are employed in machinery and equipment used in manufacturing processes, such as conveyor systems, pumps, compressors, machine tools, and packaging machines. V pulleys ensure efficient power transmission, enabling smooth operation and productivity in manufacturing facilities.
2. Automotive Industry:
V pulleys play a vital role in the automotive industry. They are used in various automotive systems, including engines, air conditioning systems, power steering systems, water pumps, and alternators. V pulleys in automotive applications ensure the proper functioning of essential components, contributing to the performance and reliability of vehicles.
3. HVAC and Refrigeration:
The HVAC (Heating, Ventilation, and Air Conditioning) and refrigeration industry heavily relies on V pulleys. They are employed in fans, blowers, and pumps used in HVAC systems, as well as in compressors and condenser units in refrigeration equipment. V pulleys facilitate efficient power transmission, enabling effective heating, cooling, and ventilation in residential, commercial, and industrial buildings.
4. Agriculture and Farming:
V pulleys are commonly used in the agriculture and farming industry. They are employed in agricultural machinery and equipment, such as tractors, combines, harvesters, and irrigation systems. V pulleys transfer power to various components, including pumps, augers, conveyors, and cutting mechanisms, ensuring efficient and reliable operation in farming operations.
5. Mining and Construction:
In the mining and construction industries, V pulleys find extensive use in heavy machinery and equipment. They are employed in excavators, bulldozers, cranes, loaders, and other mining and construction equipment. V pulleys facilitate power transmission to components such as hydraulic pumps, winches, and conveyor systems, ensuring reliable operation in demanding environments.
6. Power Generation:
V pulleys are utilized in power generation systems, including generators, turbines, and engines. They transfer power from the prime movers to the generators or other driven components. V pulleys in power generation applications contribute to the efficient conversion of energy and reliable electricity production.
7. Material Handling and Warehousing:
V pulleys are commonly employed in material handling and warehousing applications. They are used in conveyor systems, lifting equipment, and automated storage and retrieval systems. V pulleys enable the movement of materials and products, ensuring smooth and efficient logistics operations.
These are just a few examples of the industries where V pulleys are commonly used. Due to their versatility, reliability, and wide range of applications, V pulleys are employed in numerous industries and sectors that rely on efficient power transmission in their machinery and equipment.
editor by CX
2024-04-09